Wire rope clamps are crucial pieces of rigging equipment that are used to link two lengths of cable or fasten the loose end of a wire rope after it has been coiled back to form an eye.Although they are very adaptable and may be set up in the field using simple tools, they are typically meant for static loads and are not advised for crucial overhead lifting unless they are properly rated.Typically consisting of a U-bolt, saddle, and nuts, wire rope clamps are straightforward mechanical fasteners used to loop or terminate wire ropes, creating secure connections for non-critical applications like guy lines or winch cables.

They provide an affordable alternative to permanent splicing, but they require the right size, number, and "saddle on the live end" installation for safety because improper use can result in failure, making them unsuitable for critical lifting. When employing wire rope and creating end terminations, wire rope clips are a popular and essential piece of rigging gear. They are employed to join two cables or create a wire rope eye.

In order to create loops or attach two ropes by bending the free end back onto the live end, wire rope clamps—which are usually composed of a U-bolt, saddle, and nuts—are crucial pieces of rigging hardware.They provide around 80–90% of the rope's strength when put correctly, using at least three clips spaced appropriately with the U-bolt on the dead end; they must be retightened when tension is applied. They are a more affordable option than splicing, but they are often unsuitable for heavy-duty slings.

Wire Rope Clamp

Wire Rope Clamp Manufacturers

Wire Rope Clamp Suppliers

Wire Rope Clamp Exporters